 |
Road Lifts:
To use a Sefac mobile column lift, all you need is a flat, solid floor and a
power supply and before you know it, the vehicle is in the air
for important maintenance. Because Sefac lifts are portable,
they give you the flexibility to adapt as the working
environment or conditions change. They can be used inside or
outside or across multiple work stations. Once the vehicle is in
the air, you have unobstructed access to the vehicle underside
We can supply as a set of four or six columns for different type
of vehicles as well as in a range of capacities up to 50,000lbs
per column.
|
TECHNICAL
FEATURES |
A proven
design :
• Parachute nut assembly : bronze lifting nut and steel
safety nut.
• Irreversible suspended rolled screw and lifting nut.
• No additional mechanical safety latches required to
support the load.
Technical features designed to meet the requirements
of the heavy duty maintenance workshop: |
| Capacity per column/4/6
columns. |
16000, 64000 & 96000 lbs |
| Lifting height. |
70 inches |
| Lifting speed. |
27 1/2 inches/mn |
| Safety distance between
the vehicle and the front of the column. |
9 inches |
| Electrical components
protection against Water and Dust. |
Yes. IP 55 |
| Upper and lower limit
switch |
Yes. On each column |
| Emergency stop button |
Yes. On each column |
| Hydraulic jacking unit
with safety handle to move the column. |
Yes. On each column |
| Inspection window for
the safety components. |
Yes. On each column |
| Tire dimensions.
Reducers available for cars and vans. |
8.25-20 / 13.00-22,5 |
| Weight per column. |
948 lbs |
| Low column feet for low
floor buses. |
5 1/8 inches |
|
